ABSTRACT
BACKGROUND:Tissue engineering is an interdisciplinary field and its experimental safety covers a wide scope along with the increase in accidents of tissue engineering laboratories, the safety management in tissue engineering laboratories in universities has become an important public health problem. OBJECTIVE:To enhance the safety management strategies for tissue engineering laboratories in chinese universities and improve the safety management system. METHODS:PubMed, Elseveir, WanFang and CNKI databases were retrieved for the literatures concerning the biosafety, safety management of hazardous chemicals, waste, medical information, instrument operation and human body mechanics in tissue engineering laboratories, and then the status of laboratory management was analyzed. RESULTS AND CONCLUSION:The status of safety management in tissue engineering laboratories in China is analyzed based on the technique characters and regulations on safety management. Management strategies for laboratory safety have been proposed according to the differences in relevant laboratory safety management between China and the US, such as regular training on laboratory safety, improving the safety consciousness of experimental staff, constructing the strict system access to laboratory, improving safety facilities, standardizing the experimental safety manual and appointing specialized safety management committee. Comprehensive and systematical regulations on laboratory safety management will ensure the smooth running of tissue engineering laboratories in universities, thus accelerating the development of tissue engineering.
ABSTRACT
BACKGROUND:The study confirmed that adding tricalcium phosphate or pearl powder in polylactic-co-glycolic acid can complement the performance of both, which provides a good environment for cels and makes a faster and better growth of cels. OBJECTIVE:We used polylactic-co-glycolic acid as matrix, composited with pearl powder or tricalcium phosphate to prepare scaffolds by low-temperature deposition manufacturing. METHODS:Low-temperature deposition manufacturing was utilized to prepare composite scaffold of polylactic-co-glycolic acid/pearl powder or polylactic-co-glycolic acid/tricalcium phosphate at the ratio of 10:0, 5:2, 7:3 and 6:4. Microstructure, contact angle and compression modulus of elasticity of scaffolds were detected. MC3T3-E1 cels basicaly fused at 1×104/cm3 were seeded in the pure nonporous polylactic-co-glycolic acid scaffold, pure polylactic-co-glycolic acid scaffold with holes, polylactic-co-glycolic acid/pearl powder at 5:2 and polylactic-co-glycolic acid/tricalcium phosphate at 5:2 separately for 1 and 3 hours. Cel adhesion rate was detected using flow cytometry. After incubation for 1, 4 and 7 days, cel proliferation was measured using Alamar Blue method. RESULTS AND CONCLUSION:Pure polylactic-co-glycolic acid scaffold had cross-linked microporous structure, with pore size of 3-15 μm. Scaffolds ofpolylactic-co-glycolic acid/pearl powder at 5:2 or polylactic-co-glycolic acid/tricalcium phosphate at 5:2 had good continuous porous structure, with pore size of 10-25 μm. With increased content of pearl powder or tricalcium phosphate, the hydrophilicity of the composite scaffold increased. The addition of pearl powder or tricalcium phosphate could elevate compressive mechanical properties of the composite scaffold. With increased content, the mechanical property of the scaffold enhanced and then reduced. The addition of pearl powder or tricalcium phosphate improved the celular affinity of polylactic-co-glycolic acid and the biocompatibility of the scaffold. The biocompatibility of polylactic-co-glycolic acid/pearl powder scaffold at 5:2 was the best.
ABSTRACT
Serious femoral damages are a common human bone disease. Rebuilding the femur and studying its mechanical properties are a continuous medical research topic, but traditional femoral prosthesis often cause some problems such as prosthesis loosening. In this work, we selected a healthy male, took his femur scanning by CT, and rebuilt high-precision femur prototypes by Mimics10.0 software, then chose the material having good biocompatibility and biodegradable, utilizing low-temperature deposition manufacturing (LDM) technology for the femoral manufacturing. This approach, fabricating the femur via LDM technology, laid a foundation for the later research on the femoral implantation in the human body.
Subject(s)
Adult , Humans , Male , Biocompatible Materials , Cold Temperature , Computer-Aided Design , Femur , Diagnostic Imaging , Wounds and Injuries , Imaging, Three-Dimensional , Methods , Prostheses and Implants , Prosthesis Design , Software , Tomography, X-Ray ComputedABSTRACT
Three-dimensionally controlled cell-assembly technique makes fabricating tissues and organs in vitro to be possible. However, for real tissues and organs with complex structure and various cells, fabricating tissues and organs in vitro need a technique that could assemble and locate multi cells and materials precisely in the space. Facing the needs of multi-cell assembly, we designed a mixer nozzle and the matching pulse switching circuit which based on the single-nozzle cell assembly system, and developed a multi-cell-assembly system. We also carried out some assembly experiments with this system using materials that were similar to the multi-component extracellular matrix materials. The results demonstrated that the system could assemble various cells and materials into three-dimensional inhomogeneous structures precisely.